Publicidad
Idiomas disponibles
Idiomas disponibles
Programming your remote
1
1
2
2
4
4
5
5
7
7
8
8
0
0
6. Repeat steps 1 – 5 for each device you wish
to control.
Programming notes:
• Some codes may operate only a few functions
of your device. There may be another code in
the Code List that controls more functions.
Test other codes in the Code List for more
functionality.
• If you do not find a remote code that works
your device or there are no codes in the
Code List for your device, use the Auto Code
Search method in the next section to program
your remote.
• For combination devices such as a TV/DVD
combo or TV/VCR combo, you may have to
enter a code for each device.
• Write down the remote codes used to
program the remote for future reference.
SRP4229B_07 ENG Manual v2.indd 7
SRP4229B_07 ENG Manual v2.indd 7
4. Use the number buttons on the
remote to enter the first 4-digit
3
3
remote code you circled in the
6
6
Code List in Step 1. The red light
will turn off after entering the
9
9
fourth digit
5. Point the remote at the device.
Test the buttons on the remote to
see if the device responds as you
would expect. If the buttons do not
operate the device, return to Step 2
above and use the next code that
you circled for that device.
7
9/2/21 5:03 PM
9/2/21 5:03 PM
Publicidad
