Publicidad
Idiomas disponibles
Idiomas disponibles
8. CHANGING THE BATTERY
To replace the battery (CR2450 3V), follow these steps:
1. Lift the parcel box lid and remove the lock. To do this, take
out the screws shown in the drawing with a screwdriver,
unscrew the nut and remove the cam.
2. After removing the screws and the cam, extract the lock
from the exterior of the parcel box.
3. Remove the cover protecting the battery housing and
proceed to replace the battery
Important: Ensure proper placement of the parts when
assembling the lock to guarantee its correct functioning.
9.INITIALISATION FUNCTION
If you need to initialise the lock (for example, if you have
forgotten the code), follow these steps:
1. Open the parcel box lid. If necessary, use the emergency
opening; see point 3, "Emergency Opening".
2. Remove the lock from the parcel box (refer to points 6.1
and 6.2 in the "Changing the Battery" section).
3. Enter
--99--# and press the "Reset" button for 8 seconds.
*
The green light will flash with an alarm beep, and the lock
will return to the factory default settings.
"Reset" button
20
En
Publicidad
