Publicidad
Idiomas disponibles
Idiomas disponibles
„ The tabletop will release and swing upwards and unfold
the workstation.
„ Raise until the release lever clicks into place when fully
extended.
NOTE: The wheels will rotate back slightly, be aware of
the workstation when unfolding.
„ Press down to ensure the release lever is locked.
OPERATING IN CART MODE
See Figure 15-16, page 14-15.
The workstation can be used to transport items. storage
bins, tools and other equipment needed to complete a project
can be stacked and moved to the desired work area. In cart
mode the workstation will hold up to 300 lbs.
WARNING:
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
MAINTENANCE
ILLUSTRATIONS START ON PAGE 9 AFTER
Cart mode:
„ Hold the handle with both hands.
„ With your foot, press down on the release lever on the
wheel frame. This will disengage the release lever.
„ Pull upward and the workstation will fold into cart mode.
„ Raise until the release lever clicks into place when fully
folded.
„ Press down to ensure the release lever is locked.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal injury.
Periodically check all fasteners for tightness. Retighten as
necessary.
STORING THE WORKSTATION
„ The workstation should be stored on a stable flat surface
in the cart mode position.
„ All LINK™ double organizer bins or accessories should
be removed from the workstation before storing.
CAUTION:
If the workstation will not remain upright, store in the
workstation position. Failure to do so may result in falling,
resulting in injury or damage to workstation.
8 – English
Publicidad
