SANNOVER CHAUFFAGE FRESHO Manual De Uso Y Mantenimiento página 24

Identification of parts - 2
1. Control panel
This section explains the correct operation of the mobile air conditioner.
Power button
Timer button
Sleep button
2. Control panel operation
•
Automatic, Cool, Dehumidify, Fan and Heater.
1. Turning the device on
a) Plug in the device, it then emits a beep.
b) Press the " " button, and the device is on.
The LED displays the room temperature and operates in automatic mode.
2. Select mode of operation
Press the " " button to select the desired mode, as shown below :
3. Adjust Temperature
The temperature can be set in a range from 15°C to 31°C by 1°C.
Press " " or " " to increase or decrease the temperature by 1°C by pressing the button
once. The temperature setting is only valid in
The device indicator shows the set temperature for 5 seconds, then the ambient temperature.
4. Adjusting the fan speed
Speed button
Mode button
Low – high fan speed
Timer/Temperature up button
Timer/Temperature down button
Automatic, Cool,
Dehumidify Fan and Heating mode
or mode.
EN