Haden HC04001-US Manual De Instrucciones página 13

CLEANING THE STEAM NOZZLE AFTER FROTHING
1 After frothing the milk, put an empty jug under the steam nozzle.
2 Press the Steam Button and rotate the Steam Control to 'ON'
for steam release for 20 seconds, then rotate the Steam Control
to 'OFF' and press the Steam Button off to clean out the Steam
Nozzle.
3 Press the Power Button to switch the machine off.
CLEANING THE STEAM NOZZLE IF BLOCKED
1 Turn the Steam Control to the 'OFF' position and allow the
espresso Machine cool down for about half an hour, then poke
the steam outlet several times with a needle about 1 mm in
diameter until it clears.
2 Finally, press the Steam Button and turn the Steam Control to
the 'ON' position, to ensure the appliance can produce steam.
3 Press the Power Button to switch the machine off.
www.hadenusa.com
13