Publicidad
ENGLISH
u For IP 67 / IP 69: To maintain the degree of pro-
tection, tighten the bayonet ring of the inserted
plug on the wall socket by turning it clockwise
as far as it will go.
u Turn the rotary switch to the "ON" position.
ð The inserted plug is mechanically interlocked
and the power supply is established. The plug
can no longer be unplugged and disconnection
is prevented when under load.
u To disconnect the power supply, turn the rotary
switch to the "OFF" position.
ð The mechanical interlock is opened and the
plug can be disconnected.
u Lift the hinged lid.
62
u For IP67 / IP69: Loosen the plug by turning the
bayonet ring of the plug anticlockwise.
u Grasp the plug by the plug housing and pull it
out.
Do not pull on the cable to remove the plug, be-
cause the cable may be pulled out of the plug
housing and damaged. For the IP67 / IP69 version,
the hinged lid must be closed again to maintain the
degree of protection.
u Close the hinged lid.
u Tighten the bayonet ring of the hinged lid clock-
wise as far as it will go.
u Follow the instructions in the visual description
of this manual.
Publicidad
