Publicidad
Idiomas disponibles
Idiomas disponibles
Typical horizontal installation
1
Mount a mounting bracket (L) or (R) on el*
ther side of the main unit with a hex. bolt to¬
gether with double washers {M4 x 8).
Select a location where the unit should be
mounted. Fix the base brackets with a dou¬
ble-faced adhesive tape.
3
Use a cutter to cut a small cross in the car¬
pet in accordance with the locations of the
M5 bolts of the base brackets.
4
adhesive tape to a mounting surface below the
carpet.
® Double-faced adhesive tape x 2
Mount the unit on the carpet with four hex,
nuts (M5).
Typical vertical installation
Mount the unit with the mounting bracket on ei¬
ther side with a hex. bolt with double washers (M4
x8).
® Mounting bracket (L)
®
Relationship between
mounting holes and angles
Mounting bracket (L) Mounting bracket (R)
The relationship between mounting holes and an¬
gles of the mounting brackets (L and R) is illustrat¬
ed above. Symbols corresponding to the mount¬
ing angles are marked near the respective holes.
Select the correct holes in accordance with the
mounting angles to be used.
Publicidad
