Publicidad
Idiomas disponibles
Idiomas disponibles
Machine control (digital model):
The machine is controlled using an electronic microprocessor able to control the activation
and deactivation of each system. Communication with the user is carried out using a keypad,
with a display on the front top part of the machine.
The microprocessor has 9 programmes in it that the user can edit.
A digital temperature probe, located in the bottom of the drum is used to keep the temperature
constant inside the dryer. The required temperature is regulated using the aforementioned
electronic control and allows us to change values from 0 to 95 ºC, to work with the optimum
temperature for each type of fabric.
The probe sends a signal to the electronic plate and the latter activates or deactivates the
heating part.
Time control is internally carried out in the microprocessor.
The anti-crease cycle is automatically activated at the end of each cycle (Drying + Cool-Down).
The microprocessor has some signals incorporated that indicate the need for cleaning the filter.
Heating:
The heating system may be electric, gas or thermal fluid (steam or thermal oil). The heating
battery is located in the top of the machine.
Fluff filter:
This is accessed directly by opening the drawer in the middle part of the dryer, just below the door
for loading and unloading the clothes. It is designed to separate fluff and possible solid materials
that come off the dried material, so that they do not enter the propeller of the extraction fan. The fluff
accumulates in the filter.
The drawer has two catches that should be pressed together at the same time in order to release
the drawer. These catches also serve as handles and once the drawer has been released, pull the
catches outwards until reaching the limit. The drawer is fitted with telescopic guides to allow it to be
pulled out far enough so that the filter is totally accessible.
72
All manuals and user guides at all-guides.com
Publicidad
