Publicidad
Idiomas disponibles
Idiomas disponibles
4. OPERATION
4.1.
Operation principle and description:
The machine dries the fibres passing hot air through the textile fibres. This air drags the humidity
and sends it to the outside.
Steps for correct drying:
Choose the same type of fibre. Do not mix different types of fibres in a drying
cycle.
Load the dryer.
Open the power supplies to the machine.
In the case of an analogue machine:
Or in the microprocessor version:
Push the START cycle button.
Remove the load at the end of the cycle.
WARNING. REMOVING THE LOAD WITHOUT CARRYING OUT THE COOL-DOWN
(PROGRESSIVE COOLING) MAY CAUSE BURNS AND DAMAGE THE APPLIANCE.
Note: For coin- or token-operated self-service machines, please see point 9.
96
All manuals and user guides at all-guides.com
o Choose the drying duration using the timer.
o Choose the right temperature using the thermostat.
o Choose the drying programme using the microprocessor where all
the parameters for an optimum drying appear. (digital version)
Publicidad
