Publicidad
Idiomas disponibles
Idiomas disponibles
GB
IE
Assembly
Mounting attachments
Connecting without adapter:
1. Connect the rotating brush (4) or the
foam nozzle with cleaning agent tank
(5) to the spray gun of your PARKSIDE
pressure washer by inserting and
screwing in (bayonet locking device)
the high-pressure connection on the gun
side.
Connecting with adapter:
1. Attach the adapter (2) to the high-pres-
sure connection and turn it through 90°
until it locks into place (bayonet locking
device).
2. Connect the spray gun of the pressure
washer (bayonet locking device) and
screw the coupling nut (3) of the adapt-
er (2) against the spray gun.
Test the rotating washing brush (4)
on all surfaces in a non-visible loca-
tion to ensure compatibility.
Operation
Rotating washing brush
• The rotating washing brush is not gen-
erally suitable for sensitive and painted
surfaces (e.g. car paint).
• The rotating washing brush (4) is al-
ways used without applying any pres-
sure. The cleaning function is produced
by the rotational movement and the
flow of water. If there is no water flow,
the washing brush does not rotate.
10
Foam nozzle with cleaning
agent tank
• When using the foam nozzle with
cleaning agent tank, only add cleaning
agent to the tank. It is suctioned auto-
matically.
Using cleaning agents
This device has been designed to be used
with a neutral cleaning agent based on
biodegradable anionic surfactants. Use
of other cleaning agents or chemical sub-
stances can negatively impact the safety of
the device and can cause damage. Such
damage to the device is not covered by
the warranty. You can buy cleaning agents
from our online shop.
Cleaning/maintenance
Always remove the mains plug of
the pressure washer before working
on the device. Otherwise, there is a
risk of electric shock.
• Clean the device with a damp cloth.
• The device is maintenance free.
• Store the device in a frost-proof room.
Storage
• Always store the product:
- dry.
- clean.
- out of the reach of children.
Publicidad
