Publicidad
Idiomas disponibles
Idiomas disponibles
English
3.
After the brackets are attached to the device, use suitable
screws (not provided) to secure the brackets to the rack.
Connection
Ethernet Port
■
Connect an Ethernet port of the switch to the computer by RJ45
cable as the following figure shown.
SFP Port
■
For switches with SFP ports, you can connect a SFP port to a SFP
module. If an SFP transceiver is installed in a slot and has a valid
link on the port, the associated RJ45 port will be disabled and
cannot be used.
2
Rack
RJ45 Cable
SFP Port
SFP Module
Publicidad
