Publicidad
Idiomas disponibles
Idiomas disponibles
Metal bracket
Short screw
Wall
Steel cable
Tools required (not included): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8" drill bit.
27. Position the assembled unit at the desired location and adjust the pre-attached floor levelers to level the
unit against a wall.
28. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously injured
by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the unit from
tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are
not a substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you
wish to add the extra security of earthquake restraints, they must be purchased and installed separately .
Assembly Instructions
Long screw
Wall
Wall
Connector
Wooden Stud
Wall
16
Floor leveler
Publicidad
