7. Turn the assembled utility drawer upright and install one Handle (S) to the front of the Utility Drawer Front
Panel (G) with two 15 mm Screws (7).
6
8. Glue eight Small Wood Dowels (6) into the inner holes on both end of the File Drawer Back Panel (M)
and File Drawer Sides (N and O) as shown.
NOTE: It is very important to use a small amount of glue on both ends of dowels and wipe away the
excess glue immediately with a damp cloth.
Drawer Assembling
N
M
6
O
6
6
8
G
6
6