Origin 21 2656FM-26-398 Manual Del Usuario página 19

ASSEMBLY INSTRUCTIONS (CONTINUED)
NOTE: Use the pre-assembled levelers on the base of
the fireplace to level the unit. Twist the levelers
counterclockwise to increase the height, twist the
clockwise to decrease the height.
WARNING: You must install the tip restraint
hardware to help prevent any accidents or damage
to the unit. We strongly recommend attaching the tip
restraint hardware to a wall stud and your unit. For
all other wall types, please visit your local hardware
store to obtain the proper hardware.
Assembly is now complete. With the help of another
person, move the unit to the final desired position.
Once in the final position, you may attach the tip
restraint hardware to the wall. You may now plug
the heater into the power outlet.
Hardware Used
Tip Restraint
MM
Hardware
1
x 2
19
MM
2
Wall Stud