Publicidad
Idiomas disponibles
Idiomas disponibles
UsE
1. Use of the brakes
The user holds the brake
handles with both hands when
the wheelchair stops, and then
moves the
brake handles forward to self-
locking condition, to make the
rear wheels stop completely to
keep
still. The process for braking is
completed. (Figure 5)
2. operation method of
cross the obstacles
In case of coming across with
obstacles,
the
accompany
should cinch the handle with
both hands, trample the end
of tube of the wheelchair, lean
back the wheelchair to lift the
front castor, thein cross the
obstacles. (Figure 6)
3. The knocked-down
method of flip back
armrest (fixed armrest is
excluded)
When detaching the armrest,
first press the armrest fastener
with one hand to separate it
from the
front bracket of seat tube,
then you can flip it back. When
assembling the armrest, make
the armrest
fastener aim at the position of the front bracket of the seat tube and
press lightly to self-locking fastener. (Figure 7)
4. The knocked-down method of detachable legrest (
fixed legrest is excluded)
When assembling the legrest, you should first aim the up and down
positioning holes at the up and down fixed pins, hang the legrest and
then circumvolve the legrest to the spring from outside to inside to reach
a state of self-locking; when detaching the legrest, you should first, then
turn the legrest outside into a certain angle, lift it to get out of the fixed
pins, and take the legrest at last. (Figure 8)
cArE AnD mAInTEnAncE
Failure to care for and monitor your product may result in the risk
of serious injury.
•
Clean the product regularly with warm water and a soft cloth. Do not
use abrasive products, detergents or solvents.
•
Dry with a clean, dry soft cloth to avoid rustiness.
•
Make sure there is no accumulation of dirt or debris around the axle,
brakes or wheels.
•
Do not use cleaning products containing phenol or chlorine, as this
could damage aluminium and polyamide materials.
•
Lubricate the wheels with a little oil if they squeak.
•
Periodically check the wear and strength of all screws and bolts.
Replace all broken, damaged or worn parts immediately.
•
Check that the brakes are working before each use. Check the brakes
by pushing the handles into the locked position, then trying to push
the product.
•
Examine Wheelchairs to see whether all parts and bolts are loose or
not after usage in some period
•
of time. If they are loose, people involved should adjust them in time
5
6
7
8
for fear of insecure hidden trouble
•
Seat and back upholstery shall be kept clean and tidy so as to protect
users' skin.
•
If there is a malfunction, do not repair the product yourself. Consult
an authorized dealer.
cHAngE oF oWnErsHIp
The product can be reused. It must first be cleaned and disinfected in
accordance with hygiene instructions. When transferring the product,
remember to hand over all the necessary technical documents to the
new user. Beforehand, the product must be inspected by an authorised
specialist.
rEcycLIng
When the product has become unusable and you have to throw it away:
please contact your specialist dealer. If you wish to carry out recycling
for yourself, ask your local waste management company for disposal
guidelines.
sTorAgE
Failure to observe the storage conditions may lead to deterioration
of the product and thus to the risk of serious injury.
•
Do not store your product for an extended period of time near a heat
source or in the sun (e.g. behind a window or near a radiator) or near
a cold source.
•
Keep away from all flames and sources of sparks.
•
Observe the conditions for storing and stowing your product :
-
In a dry and temperate place
-
Protect your product by packaging it from dust, corrosion (e.g.
abrasive elements, sand, sea water, salty air).
-
Store all removed parts together in the same place (or locate them
if necessary) to avoid mixing them with other products when
reassembling.
-
All components must be stored without any load (do not place any
objects that are too heavy on the product elements, do not jam
anything...).
TEcHnIcAL spEcIFIcATIons
Overall dimensions
Seat dimensions
Seat Width
Seat Depth
Floor to seat Height
Backrest Height
Folded Width
Front Caster Size
Rear Caster Size
Structure
Weight
Maximum weight supported 120 kg
pErIoD oF UsE
The life expectancy of this product is 5 years under normal use, safety
and maintenance conditions. Beyond this period, the product can be used
for as long as it is still in good condition.
WArrAnTy
This product is guaranteed for two years from the date of purchase by
Width. 63 x Depth. 103 x Height 91 cm
Width 45 x Depth. 40 x height 50 cm
46 cm
40 cm
50 cm
41 cm
26.5 cm
20 cm
61 cm
Steel grey colour
18.5 kg
5
Publicidad
