Veratron VIEWLINE A2C59512370 Manual Del Usuario página 12

INSTALLATION INSTRUCTIONS: Viewline 85 mm
Speedometer
3. Setting the clock
4. Setting the brightness
1. Activate T. 30 (8-pin - Pin1)
2. Activate T. 15 (8-pin - Pin4)
Press the Mode key repeatedly until the time is displayed
Press and hold Mode key
Set time is displayed; the first digit flashes.
Press Mode key briefly
The flashing digit increases by 1. If the flashing digit is "9", the display returns to
"0"
Press and hold Mode key
The next lower digit flashes.
Press Mode key briefly
The flashing digit increases by 1. If the flashing digit is "9", the display returns to
"0"
Continue until the correct time is set
Press and hold Mode key
Clock is set.
Important: If T. 30 (8-pin - Pin1) is deactivated, the clock no longer runs.
1. Activate T. 30 (8-pin - Pin1)
2. Activate T. 15 (8-pin - Pin4)
Press the Mode key repeatedly until the on-board voltage is displayed
Press and hold Mode key
Press the Mode key repeatedly until the desired brightness
is reached The brightness can be set between 0 (OFF)
to 10 (max).
Press and hold Mode key
The desired brightness is now permanently set.
Technische Änderungen vorbehalten - Technical details subject to change
TU00-0752-7407102
10/15
1-11 10
GB