SAKAWA AS20T Manual De Instrucciones página 70

STEP 3: ASSEMBLY OF OIL TANK AND WHEELS
Assemble the wheel to the hydraulic oil tank using the wheel shaft , the hexagonal nut M8
and the flat washer ¢8x¢24x2
Attach the hydraulic oil tank to the main frame using the M10×30 hex bolt (#10), ¢10 flat washer
(#11) and M10 hex lock (#33).
Fastened the front support leg to the main frame using an M10×70 hex bolt (#36), a ¢10 flat
washer (#11) and an M10 hex safety nut (#33)
STEP 4: ENGINE ASSEMBLY
Attach the engine to the hydraulic oil tank using an M8×40 hex bolt (#14), a ¢8 flat washer (#17),
a ¢8 safety washer (#16) and an M8 safety nut.
Connect the suction pipe to the oil tank and gear pump using the ring
70