Publicidad
Idiomas disponibles
Idiomas disponibles
ThE LED DISpLAY
The LED display shows the settings, estimated time remaining, options, and status messages
for your washer. When the washer is turned on, the display will illuminate.
2
1
1
CYCLE COmpLETION INDICATOR
This portion of the display shows which stage of
the wash cycle is currently underway
(WASH, RINSE, SPIN or DRY).
2
ESTImATED TImE REmAININg
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the cycle,
as is typically shown on a top-loading washer.
H O W TO U S E
4
3
3
DOOR LOCk INDICATOR
Indicates that the door is locked. The washer
door will lock while the washer is operating. The
door can be unlocked by pressing the START/
PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too
high, select the DRAIN & SPIN cycle to drain
excess water. Do not try to force open the door.
ChILD LOCk INDICATOR
4
This indicator shows that the washer has
been set for CHILD LOCK. Select this function
to lock the buttons on the control panel and to
prevent tampering.
1
Publicidad
