Parkside 409134 2207 Instrucciones De Manejo página 5

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following operating
instructions carefully.
Use the product only as described and only
for the given areas of application. Store these
operating instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x welding cabin, foldable (1)
1 x handle (2)
2 x screw (3)
3 x wing screw (4)
2 x washer (5)
2 x spring washer (6)
2 x nut (7)
1 x operating instructions
Technical data
Dimensions (unfolded):
approx. 40 x 50 x 38cm (L x W x H)
Date of manufacture (month/year):
01/2023
Intended use
This product is designed to protect non-
participating persons and the environment
from welding light and welding spatters during
welding work. The product is only for private
use. The product is not suitable for plasma
cutters.
Safety information
Important: please read the operating
instructions carefully and keep them for
future reference!
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of
suffocation!
Risk of injury!
• No modifications may be made to the
product!
• Please not the manufacturer's information and
the safety information for the welding device.
• Check the product for damage or wear
before each use. Use the product only if it is in
perfect condition!
• The product is not suitable for the use of
plasma cutters.
Preventing damage to the
product!
• Keep the welding power source away from
the product.
• The base plate can become hot. Choose a
surface that is not sensitive to heat to prevent
damage to the supporting table.
Assembly
To assemble the product you will need a suitable
screwdriver (not included in the package
contents).
1. Unfold the product (1) (Fig. B).
2. Attach the handle (2) to the product using the
screws (3), washers (5), spring washers (6)
and nuts (7) (Fig. C).
3. Attach the wing screws (4) to the product
(Fig. D).
Note: the third wing screw on the base of the
product serves as a reference connection for
attaching the earth terminal (not included in the
package contents).
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature.
Clean only with water and wipe dry afterwards
with a cloth.
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE 5