Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3. Press and hold the Hot Water button
hot water.
4. After the preparation of hot water is finished, the device will automatically switch to the standby
mode.
5. Press and hold the Hot Water
function.
CAUTION! When preparing hot water, take care not to scald yourself with the water or the
escaping steam.
MANUAL MILK FROTHING
CAUTION! When the Milk Foam
overheating protection mechanism of the device is activated.
If it is necessary to activate the Hot Water
about 3-5 minutes until the indicator lights up solid. After this
time, the Hot Water function may be activated
1. Place and appropriate cup under the coffee outlet.
CAUTION! The milk cup volume should exceed 200ml.
2. Fill the milk container with an appropriate amount of cold milk.
CAUTIONI! It is recommended that the temperature of the milk is 5-10°C and that the fat con-
tent of the milk is at least 3%. The amount of milk in the container should not exceed the MAX
mark on the container.
3. Press and hold the Milk Foam
ual frothing function.
4. After the milk frothing process is over, the device will automatically switch to the standby mode.
5. Press and hold the Milk Foam button
function.
NOTES!
After each use, if there is still milk in the milk container it should be kept in the fridge and
the milk hose and milk frother should be cleaned immediately after use.
It is recommended to use a high cup to prevent the splashing of the foamed milk.
After the device is no longer used, carry out the cleaning process (see section: Cleaning
and maintenance)
MANUAL CLEANING
1. Place the water container under the coffee
outlet.
2. Press and hold the Clean
2 seconds and the machine will start the man-
ual cleaning function.
3. After the cleaning process is finished, the de-
vice will automatically switch to the standby
mode.
4. Press and hold the Clean button
least 1 second if you wish to cancel the current function.
50
for at least 2 seconds and the device will start producing
button for at least 1 second if you wish to cancel the current
function is performed, the
function, wait
.
button for at least 2 seconds and the machine will start the man-
for at least 1 second if you wish to cancel the current
button for at least
for at
Publicidad
