Televes Avant 3 Manual De Instrucciones página 49

User manual
FILTER 1 FILTER 1
_
_ _
25
25 __
Over the channel value, there is the "grap-
hic" depiction of the filter, that gets wider as
the user increases the filter width.
The filters can widen up to 7 channels from
channel 30 on. If the lower part of the filter is
under channel 31, this maximum width is
limited to 5 channels.
If the lower part of the filter is modified, the
upper part is automatically erased.
The range of channels that can be entered is
as follows:
UHF: --, 21, ..., 69
VHF: --, 05, ..., 12, S11, ..., S20
If there is an overlap of filters, the filter which
is in conflict is displayed onscreen and the
unit cannot save the data.
_
28
FILTER 2
_
27
The unit's LEDs switch on depending on the
filter that we are programming.
Error F1
_
31
49
Avant 3