PNI CT440 Manual Del Usuario página 20

LED corresponding to the zone (Zone 1 or Zone 2) will blink rarely.
In case of loss of the WiFi signal between the receiver unit and the
router, the WiFi LED on the receiver unit will blink.
Recommendations:
• Change the batteries of the central unit if necessary.
• Bring the units closer to each other and the receiver unit to
the WiFi router and check the status of the devices again.
• If in a few minutes the operation does not return to normal
and the Zone LED continues to blink rarely, delete and
perform the pairing procedures again: first of the central
unit with the receiver unit and then the pairing with the
wireless router (through the application mobile).
Set the time and the day of the week
1. With the screen on, long press the M button for 5-6
seconds. Only the time remains displayed on the screen, and
the minute indicator flashes.
2. Press the Up and Down keys until you reach the desired
value. Press the M key to confirm.
3. The hour indicator blinks. Press the Up and Down keys until
you reach the desired value. Press the M key to confirm.
4. The indicator corresponding to the day of the week, 1
User manual 20