Descargar Imprimir esta página

MPM MOD-61 Manual De Instrucciones página 27

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
CAUTION! The installed filter element must be completely dry. The assembly of the wet filter
poses the risk of electric shock.
CLEANING AND MAINTENANCE
1. Clean the vacuum cleaner housing and dust container occasionally with a damp cloth. This will help
keep the appliance looking good.
2. Sharp objects and all kinds of strong cleaning agents (e.g. solvents) must not be used for this pur-
pose, as this will permanently damage the vacuum cleaner housing.
3. In the case of air filters, act in accordance with the above-mentioned hints.
IN CASE OF FAILURE
Type of failure:
the dust container cannot be fitted in its
place
overheating of the vacuum cleaner housing Slight heating of the housing is normal; if it gets very hot, switch off the vacuum cleaner
low suction power
TECHNICAL DATA
Technical specifications are given on the product nameplate.
Lenght of the mains cable: 5 m
Range of the vacuum cleaner: 7 m
CAUTION! MPM agd S.A. reserves the right to technical changes.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
Possible causes:
incorrectly fitted motor filters
immediately and wait for it to cool down.
heavily soiled filters
Dust container full
clogged hose or telescopic tube
In case of any doubts, please read its English version.
Tips:
install the motor filters correctly
clean or replace the filters
Empty the dust container
remove any objects that block the hose or
telescopic tube
This manual has been machine translated.
EN
27

Publicidad

loading