Publicidad
Idiomas disponibles
Idiomas disponibles
FlashLight
Figure 8
5) Remove the lamp base as as the
direction showed.
Figure 11
8) Align the lamp holder with the
xed space, and tighten it with the
Φ4*25 screw in the accessories.
Figure 14
11) Put on the decorative ring and
nish the installation.
85265
6) Remove the yellow cover as the
direction showed.
9) Install the lock-ring correctly.
Figure 9
7) Connect the power supply and
antenna.
Figure 12
10) Align the xing holes of the
lampshade and the base, and
fasten the screws (Φ2.3*8)..
Opening your life
Figure 10
Figure 13
1 3
Publicidad
