Publicidad
Idiomas disponibles
Idiomas disponibles
FlashLight
Figure 19
7) Press the base´s holes into the
lamp.
Figure 22
10) Put on the decorative ring and
nish the installation.
85265
8) Connect the power wire rst.
then x the lamp connector to the
bracket with a Ø 3 * 12 mm self-ta-
pping screw.
Figure 20
9) Install the seal ring and lamp
cover, x the lamp cover and the
lamp socket with screw ofΦ
2.3*8mm in the accessory.
Opening your life
Figure 21
5
Publicidad
