Endress+Hauser Soliwave M FQR50 Instrucciones De Operación página 30

de - Montage
en - Installation
fr - Montage
es - Instalación
it - Installazione
nl - Montage
30
en - Installation
• Direct installation with threaded connection (A)
• Window of microwave-permeable glass or plastic (B & C), e.g. PTFE
• Installation with danger of condensation on the container's inner wall (C)
• Sight glass fittings (D) for various applications with microwave-permeable
windows made of glass
• The maximum length E depends on the permittivity and the water
absorption of the plastic material, example PTFE: E ≤ 300 mm
• Fouling (material accumulation) in the nozzle area (F) should be avoided in a
suitable manner, e.g. by purge air
• The pipe can be made of any desired metallic material, edges inside the pipe
(e.g. at transitions) can cause signal attenuation and thus should be avoided
wherever possible.
The length L of the pipe is unimportant due to the waveguide effect.
Endress+Hauser