Descargar Imprimir esta página

Aspes AC11852BNF Manual De Uso página 61

Publicidad

Idiomas disponibles

Idiomas disponibles

3 USING THE APPLIANCE
3.1 Information about New Generation
Cooling Technology
Fridges with new-generation cooling
technology have a
different operating
system to static fridges.
Other (static) fridges
may experience a build
up of ice in the freezer
compartment due to
door openings and
humidity in the food. In
such fridges, regular
defrosting is required;
the fridge must be
switched off, the frozen
food moved to a
suitable container and
the ice which has
formed in the freezer
compartment removed.
In fridges with new-
generation cooling
technology, a fan
blows dry cold air evenly throughout the
fridge and freezer compartments. The cold
air cools your food evenly and uniformly,
preventing humidity and ice build-up.
In the refrigerator compartment, air
blown by the fan, located at the top of
the refrigerator compartment, is cooled
while passing through the gap behind
the air duct. At the same time, the air is
blown out through the holes in the air duct,
evenly spreading cool air throughout the
refrigerator compartment.
There is no air passage between the
freezer and refrigerator compartments,
therefore preventing the mixing of odours.
As a result, your fridge, with new-
generation cooling technology, provides
you with ease of use as well as a huge
volume and aesthetic appearance.
3.2 Thermostat Setting
The thermostat automatically regulates
the temperature inside the refrigerator and
freezer compartments. Cooler temperatures
can be obtained by rotating the knob to
higher numbers, 1 to 5.
Lamp cover
3.3 Temperature Adjustment Warnings
• It is not recommended that you operate
your fridge in environments colder than
10°C in terms of its efficiency.
• Temperature adjustments should be
made according to the frequency of door
openings, the quantity of food kept inside
the fridge and the ambient temperature in
the location of your fridge.
• In order to allow your fridge to reach
the operating temperature after being
connected to mains, do not open the
doors frequently or place large quantities
of food in the fridge. Please note that,
depending on the ambient temperature,
it may take 24 hours for your fridge to
reach the operating temperature.
• A 5 minute delay function is applied
to prevent damage to the compressor
of your fridge when connecting or
disconnecting to mains, or when an
energy breakdown occurs. Your fridge
will begin to operate normally after 5
minutes.
• Your appliance is designed to operate in
the ambient temperature (T/SN = 10°C
- 43°C) intervals stated in the standards,
according to the climate class displayed
EN - 61
Thermostat knob

Publicidad

loading

Este manual también es adecuado para:

Ac11852bnfx