Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (continued)
TIMER
SLEEP
/MINUT.
/VEILLE
POWER ON OR OFF
Press POWER to turn on or off the dehumidifier.
POWER
/MARCHE
DESIRED HUMIDITY MODE
□ Press and release MODE until you see the symbol for the desired humidity setting. Operating modes are Auto Dry,
Continuous or Manual Set.
MODE
□ Auto Dry - The dehumidifier will operate in dry mode only. The desired humidity is set to 50% automatically and
can not be adjusted.
□ Continuous/ Super Dry - The dehumidifier will operate continuously. The fan speed can be adjusted. The desired
humidity is set to 30% automatically and can not be adjusted.
□ Manual Set- The dehumidifier will operate at the selected fan speed to the set humidity level. If the humidity level of
the room is higher than the desired humidity setting, the compressor will turn on. If the humidity level of the room is
lower than the desired humidity setting, the compressor will turn off, as well as the fan.
NOTE: The de-icing function will turn off the compressor if a low temperature condition occurs. When the de-icer senses
the correct operating temperature the compressor will cycle back on. Some freezing is normal when dehumidifiers are used
at low temperatures.
EMPTY BUCKET LIGHT
If this light is on, the fan and the compressor will stop running. This light indicates that you need to check:
□ If the bucket is full, empty and re-install bucket. If the bucket is not in position, remove the bucket and re-install it.
Make sure the bucket fits all the way into the dehumidifier and the bucket light is off, or dehumidifier will not run.
FAN SPEED
□ Press FAN to select fan speed.
FAN
□ Choose LOW, MED/ MID or HIGH.
/VENT.
□ LOW-Reach the desired humidity setting with lower sound level.
□ MED/ MID-Achieves set humidity at normal speed.
□ HIGH-Reach the desired humidity setting faster.
NOTE: Once the relative humidity of the room hits the desired setting, the compressor will stop and
the fan will be off periodically. The fan may periodically turn on, to read the humidity level, without the
compressor running.
HUMIDITY LEVEL
□ Press the Plus or Minus button to set the desired humidity level. Desired humidity in the digital display will flash for 5
HIGH
/ÉLEVÉ
seconds after operation.
□ Actual room humidity will be displayed after 5 seconds of flashing the desired humidity.
FAN
LOW
/VENT.
/FAIBLE
NOTE: Humidity can only be adjusted manually in Manual Set mode. In Continuous and Auto Dry mode,
humidity level is set automatically.
QUIET
□
Press QUIET to run the dehumidifier in lower noise operation.
/FAIBLE
NOTE: Once the MODE or FAN SPEED are changed, the dehumidifier will quit QUIET modeautomatically.
HIGH
/ÉLEVÉ
FAN
LOW
/VENT.
/FAIBLE
10
Publicidad
