ASSEMBLY STEPS
1. Install the cat litter basin (the
bottom basin needs to be
installed in place)
4. On the inside of the fuselage,
Install the foam stopper.
7. Install the interior door.
EN
2. Assemble the pedal
according to the
corresponding holes on the
pedal
5. Press the key to raise the
rake.
8. Put the waste collection
basin in a garbage bag and
put it in the cabin
3. Press and hold the buttons
on both sides of the pedal at
the same time and put the
pedal into the body.
6. Press and hold the buttons
on both sides to install the
rake.