Publicidad
Idiomas disponibles
Idiomas disponibles
serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to
refer to the:
Inspection camera
Electrical safety
a) The plug must fit the socket. Do not modify the plug in any way. Using
original plugs and matching sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes, heaters, boilers and
refrigerators. There is an increased risk of electric shock if the earthed
device is exposed to rain, comes into direct contact with a wet surface
or is operating in a damp environment. Water getting into the device
increases the risk of damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it to carry the
device or to pull the plug out of a socket. Keep the cable away from
heat sources, oil, sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e) If using the device in a damp environment cannot be avoided, a residual
current device (RCD) should be applied. The use of an RCD reduces the
risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows obvious
signs of wear. A damaged power cord should be replaced by a qualified
electrician or the manufacturer's service center.
g) To avoid electric shock, do not immerse the cord, plug or device in
water or other liquids. Do not use the device on wet surfaces.
h) ATTENTION! DANGER TO LIFE! While cleaning, never immerse the
device in water or other liquids.
Safety in the workplace
Publicidad
