Steinberg Systems SBS-EC-20S Manual De Instrucciones página 46

see DVR system / micro SD card recorder PLAY VIDEO manual on the
screen.
3. Insert a USB stick/removable hard disc into the USB Port, or micro SD
card into micro SD card slot, you can see USB stick / micro SD card
connected on the screen and the LED light indicator is on.
NOTE: When You plug in the USB stick/micro SD card before starting
the device, it might not detect the USB stick/micro SD card. In this
case please remove the memory and reconnect it in the device.
4. Press remote control button no 3 to start the recording and the
RECORDING LED light is on. In recording, press the RECORDING button
again, the DVR will take a photo and it is saved in the USB stick or micro
SD card.
5. Press remote control Button 7 to stop recording.
6. Press remote control Button 1 to review recording.
NOTE:
DVR system sometimes need 10-20 seconds for reposition
before it can work properly, so please let it run about 20 seconds each
time when you try to record.
LED indicators
1） REM : Remote receiving window
2） Power: indicates that the system is on
3） Recording: blinks during recording
4） USB/Micro SD: It indicates that USB/micro SD device is connected
5） Error: It indicates that the system or USB/micro SD device has error
6） IR: It blinks when the remote control is in use for Recording Video.
The recorded video files will be stored in a directory of USB/Micro SD devices.
You can use the on-screen menu or press (REC) button to start recording.
Press (■/EXIT) button to stop recording. During the recording, the screen will