Publicidad
Idiomas disponibles
Idiomas disponibles
EnGLIsh
CORDLESS SMALL ANGLE GRINDER
DCG406, DCG413
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No-load speed
Grinding wheel diameter
Grinding wheel thickness (max)
Cutting off wheel diameter
Cutting off wheel thickness (max)
Wire wheel diameter
Wire wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)*
* weight includes side handle and guard
Noise values and vibration values (triax vector sum) according
to EN62841-2-3:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound
level)
Surface grinding
Vibration emission value a
=
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a
=
h,DS
Uncertainty K =
Concrete grinding and cutting off
Vibration emission value a
h,CG
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is
used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
32
WALT one of the
e
DCG406
V
18
DC
2
Li-Ion
W
800
min
-1
9000
mm
125
mm
6.4
mm
125
mm
3
mm
115
mm
13
M14
mm
21.5
kg
1.74
dB(A)
85
dB(A)
93
dB(A)
3
m/s
2
4.8
m/s
2
1.5
m/s
2
<2.5
m/s
2
1.5
=
m/s
2
4.1
m/s
2
1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
DCG413
accessories, keep the hands warm, organisation of work patterns.
18
CAUTION: Working with the wire brush or the abrasive
cutting can lead to different vibration levels.
1
WARNING : Grinding thin sheets of metal or other easily
Li-Ion
vibrating structures with a large surface can result in a total noise
800
emission much higher (up to 15 dB) than the declared noise
emission values. Such workpieces should as far as possible be
9000
prevented from emitting sound by suitable measures such as the
115
application of heavy flexible damping mats. The increased noise
6.4
emission is also to be considered for both the risk assessment of
noise exposure and selecting adequate hearing protection.
115
EC-Declaration of Conformity
3
Machinery Directive
115
13
M14
21.5
Cordless Small Angle Grinder
1.72
DCG406, DCG413
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 +A11:2022, EN IEC 62841-2-
3:2021 +A11:2021.
85
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
93
the following address or refer to the back of the manual.
3
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
4.8
1.5
Markus Rompel
Director Engineering
<2.5
D
WALT, Richard-Klinger-Strasse 11,
e
1.5
65510, Idstein, Germany
13.12.2023
4.1
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
1.5
Cordless Small Angle Grinder
D
WALT declares that these products described under
e
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
DECLARATION OF CONFORMITY
2008
DCG406, DCG413
WALT at
e
WALT.
e
Publicidad
