Publicidad
Idiomas disponibles
Idiomas disponibles
a)
Make sure the workplace is clean and well lit. A messy or poorly lit workplace
may lead to accidents. Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive environment, for example in
the presence of flammable liquids, gases or dust. The device generates sparks
which may ignite dust or fumes.
c)
If you discover damage or irregular operation, immediately switch the device
off and report it to a supervisor without delay.
d)
If there are any doubts as to the correct operation of the device, contact the
manufacturer's support service.
e)
Only the manufacturer's service point may repair the device. Do not attempt
any repairs independently!
f)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one
intended for use on live electrical devices) to put it out.
g)
Children or unauthorized persons are forbidden to enter a work station. (A
distraction may result in loss of control over the device).
h)
Use the device in a well-ventilated space.
i)
Regularly inspect the condition of the safety labels. If the labels are illegible,
they must be replaced.
j)
Please keep this manual available for future reference. If this device is passed
on to a third party, the manual must be passed on with it.
k)
Keep packaging elements and small assembly parts in a place not available to
children.
Remember! When using the device, protect children and other bystanders.
2.3.
Personal safety
a)
Do not use the device when tired, ill or under the influence of alcohol,
narcotics or medication which can significantly impair the ability to operate
the device.
b)
The device is not designed to be handled by persons (including children) with
limited mental and sensory functions or persons lacking relevant experience
and/or knowledge unless they are supervised by a person responsible for
their safety or they have received instruction on how to operate the device.
c)
The device can be handled only by physically fit persons who are capable of
handling it, properly trained, familiar with this manual and trained within the
scope of occupational health and safety.
d)
To prevent the device from accidentally switching on, make sure the switch is
on the OFF position before connecting to a power source.
EN
Publicidad
