Publicidad
Idiomas disponibles
Idiomas disponibles
Working tips:
• If the fumes suction during operation becomes too small (the air pressure
amount on the gauge becomes smaller), turn off the compressed air supply
and then machine and clean the air filter.
• At the end of each workday while the device is turned off, open the
compressed air valve 7-10 times for 3-8 seconds to perform quick air
cleaning.
3.3.
Cleaning and maintenance
a)
Unplug the mains plug and allow the device to cool completely before each
cleaning, adjustment or replacement of accessories, or if the device is not
being used.
Wait for the rotating elements to stop.
•
b)
Always close the pressurised air valve first before cleaning.
c)
Use only non-corrosive cleaners to clean the surface.
d)
Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
e)
Do not spray the device with a water jet or submerge it in water.
f)
Do not allow water to get inside the device through vents in the housing of
the device.
g)
Clean the vents with a brush and compressed air.
h)
The device must be regularly inspected to check its technical efficiency and
spot any damage.
i)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a
metal spatula) because they may damage the surface material of the
appliance.
j)
Do not clean the device with an acidic substance, agents of medical purposes,
thinners, fuel, oils or other chemical substances because it may damage the
device.
k)
The cartridge air cleaner should be dismantled and cleaned after every 15 (12
workhours)-21 (8 workhours) days of duty. To clean it:
EN
Publicidad
