EKSA Telecom H1 Manual Del Usuario página 10

Reset
Under connected/pairing state, press the "MFB" and the "volume-" for 6
seconds simultaneously until the LED lights up in blue and red simultaneously
for 1 second，indicating the pairing information is cleared.
Charging
1. When battery is less than 10%, the headset will voice prompt "battery low"
every 3 minutes, please charge it as soon as possible.
2. When EKSA H1 is not in use, please charge it at least one time every 2
months.
3. Please use the original charging cable for charging. Charging voltage can't
exceed 5V.
The LED lights up in blue
and red simultaneously
for 1 second
5V 1A
≥1.5H
8
6"