FONESTAR NMX SYSTEM Guía Rápida página 11

6.- At this point we can access the ROUTING tab where we can see the TRANSMITTER devices
(Dante audio outputs) at the top and the RECEIVERS (Dante audio inputs) at the bottom. Click on the
to display all channels in matrix form.
7.- Through this matrix we can assign the audio channel of the microphone to 1 or more input channels of
the matrix or matrix is Dante by clicking on the cell where the microphone channel and the input channel
intersect. Almost immediately you will see a green tick in this cell indicating the correct assignment of
the audio channel.
At this point we can apply DSP fi lters on the matrix output channel via the PC SW and send messages to
the selected zones via the PC software or via the confi gurable buttons on the TAB-10-16 tablets.
For more information on this system, please refer to the manual
on the website. Go to the DOCUMENTATION tab on the matrix
website www.fonestar.com/en/NMX-88, or read the QR code,
and download the manual.
- 11 -
EN