If you see a red LED on the wireless subwoofer or wireless rear speakers, it means that the soundbar is not connected to the
speakers. If this is the case, connect them in the following order.
A Press the Power
button on the soundbar to turn it off.
B Press the PAIRING button on the back of the wireless subwoofer or wireless rear speakers. Check if each LED blinks green.
- If you still see a red LED on the wireless subwoofer or wireless rear speakers, press and hold the button on the back of the
subwoofer or wireless rear speakers again.
C Press the Power
button on the soundbar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer or wireless rear speakers light up in
green.
Keep the soundbar, the subwoofer and wireless rear speakers away from the device (ex. wireless router, microwave oven, etc.) over
1 m to prevent wireless interference.
y Some speakers may not make sound depend on the input source. Select BASS BLAST (BASS BLAST+) sound mode to listen through
all speakers.
y Design and specifications are subject to change without notice.
y Google Play is a trademark of Google LLC.
S95TR.DEUSLLK_SIMPLE_MFL69306437.indd 5
2024-03-05
2:12:46