Publicidad
Idiomas disponibles
Idiomas disponibles
Chain/chain bar
over-heats
Pole saw vibrates,
does not saw
properly
TECHNICAL DATA
Bar length
Oil tank capacity
Chain pitch
Chain gauge
EN
Degree of protection
Machine weight
COMBINATIONS OF CUTTING ATTACHMENTS
KAC333-10''/25cm 0.043''/1.1mm 3/8 LP bar
KAC302-10''/25cm 0.043''/1.1mm 3/8 LP chain
16
No oil in oil tank
Vent in oil fill cap clogged
Oil passage clogged
Chain is over tensioned
Dull chain
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the wrong
direction
Cutting attachment
Refill oil
Clean cap
Clean oil passage outlet
Adjust chain tension
Sharpen chain or replace
Adjust chain tension
Sharpen chain or replace
Replace chain
Reassemble with chain in correct
direction
KAC361
10'' (25 cm)
5.4 oz. (160 ml)
3/8'' LP
.043 '' (1.1 mm)
IPX4
3.9 Ibs (1.8kg)
Publicidad
