Descargar Imprimir esta página

KRESS KAC361 Manual Del Usuario página 6

Fijación de la sierra de pértiga
Ocultar thumbs Ver también para KAC361:

Publicidad

Idiomas disponibles

Idiomas disponibles

and increase the risk of fire.
10) Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
11) Do not modify or attempt to repair the product
or the battery pack (as applicable) except as
indicated in the instructions for use and care.
POLE SAW SAFETY
WARNINGS
WARNING – Do not operate near electrical power
lines. The unit has not been designed to provide
protection from electric shock in the event of contact
with overhead electric lines. Consult local regulations
for safe distances from overhead electric power lines
and ensure that the operating position is safe and
secure before operating the pole saw.
a) Keep all parts of the body away from the saw
chain. Make sure the switch is off when clearing
jammed material. Saw chain continues to move after
the switch is turned off. A moment of inattention
while operating the pole saw may result in serious
personal injury.
b) Carry the pole saw by the handles with the saw
chain stopped. When transporting or storing the pole
saw, always fit the scabbard. Proper handling of the
EN
pole saw will reduce possible personal injury from
the saw chain.
c) Hold the pole saw by insulated gripping surfaces
only, because the saw chain may contact hidden
wiring or its own cord. A saw chain contacting a
"live" wire may make exposed metal parts of the
pole saw "live" and could give the operator an
electric shock.
d) Keep all cables away from cutting area. During
operation the cable may be hidden in shrubs and
can be accidentally cut by the saw chain.
e) Do not use the pole saw in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by
lightning.
f) To reduce the risk of electrocution, never use near
any electrical power lines. Contact with or use
near power lines may cause serious injury or electric
shock resulting in death.
g) Always use two hands when operating the pole
saw. Hold the pole saw with both hands to avoid
loss of control.
h) Always use head protection when operating
the pole saw overhead. Falling debris can result in
serious personal injury.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred battery
pack.
b) Do not expose battery pack to heat or fire.
6
Avoid storage in direct sunlight.
c) Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box or
drawer where they may short-circuit each
other or be short-circuited by other metal
objects. When battery pack is not in use, keep
it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or fire.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not allow
the liquid to come in contact with the skin
or eyes. If contact has been made, wash the
affected area with copious amounts of water
and seek medical advice.
f) Do not use any battery pack which is not
designed for use with the equipment.
g) Keep battery pack out of the reach of
children.
h) Always purchase the battery pack
recommended by the device manufacturer
for the equipment.
i) Keep battery pack clean and dry.
j) Wipe the battery pack terminals with a clean
dry cloth if they become dirty.
k) Battery pack needs to be charged before use.
Always use the correct charger and refer to
the manufacturer's instructions or equipment
manual for proper charging instructions.
l) Do not leave battery pack on prolonged
charge when not in use.
m) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
n) Recharge only with the charger specified by
Kress. Do not use any charger other than
that specifically provided for use with the
equipment.
o) Retain the original product literature for
future reference.
p) Use only the battery pack in the application
for which it was intended.
q) Remove the battery pack from the equipment
when not in use.
r) Dispose of properly.
s) Do not mix cells of different manufacture,
capacity, size or type within a device.
t) Keep the battery away from microwaves and
high pressure.
SAVE THESE INSTRUCTIONS

Publicidad

loading