Kesser KKA-2001 Manual De Instrucciones página 37

SETTINGS
 Start and shutdown
 Press POWER to turn on the device.
 The device runs in smart mode by default.
 Press the MODE button to select the desired operating mode.
 Press POWER again to turn off the device.
Mode
The device has four operating modes: Cool, Auto, Fan, Dry.
A. Cool your room
 Select the cooling mode to lower the temperature in your room.
 Press the MODE button until the COOL operation LED lights up.
 Press the ADD/MINUS button to set the temperature displayed on the screen.
The temperature can be set between 16°C and 32°C.
 Press the SPEED button until the desired fan speed indicator lights up.
 Note: The air conditioner stops when the room temperature is lower than the
selected temperature.
B. Ventilate the room
 Press the MODE button until the ventilation mode LED lights up.
 In ventilation mode, the room air is circulated, but not cooled.
 Press the SPEED button repeatedly to set the desired fan speed.
C. Dry your room
Press the MODE button until the DEhumidification mode indicator LED lights up.
Note: In this mode, the fan speed is switched to low speed and cannot be selected.
The user should connect the hose to the drain at the bottom of the device.
D. Auto mode
In AUTO mode, the cooling and ventilation mode is controlled depending on the
room temperature and the target temperature.
Press the MODE button until the AUTO operation LED lights up.
The device starts by default with a target temperature of 23 ° C.
1. At a temperature of ≥ 24 °C, thesystem operatesin COOL mode.
2. At a temperature of 24°C, the device works in fan mode.
3. Once the operating mode is selected and remains on, the device will turn on and
off to maintain the temperature level.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
37
www.eshopping.de