BETEX iDuctor 1 Manual Del Usuario página 7

3�3 Plug types
Due to the wide variety of plug types, the power cable supplied may not fit the wall socket. In
such cases, obtain a power cable with an IEC C13 connector and a mains plug that fits.
IEC C13 connector
4. Operation
4.1 Connecting inductors
A fixed or flexible inductor must be connected to the unit. This connection is extremely
robust, thanks to the patented clamping mechanism. Fixed and flexible inductors are
connected or removed by simultaneously depressing both buttons on the side of the unit.
The inductors contact points are then fully inserted in the holes at the front of the iDuctor.
The buttons should then be released. The patented clamping mechanism will ensure that the
inductor is held very firmly in place. Before using the unit check that the contacts have been
fully inserted and that the connection is tight.
WARNING!
Select a fixed inductor which will fit closely around the object to be heated
without touching it. This allows the optimal transfer of magnetic energy
so that the object heats up as fast as possible, as well as preventing the
inductors protective sleeve from being damaged by contact or wearing faster
due to overheating.
© BETEX Tools
CEE 7/7 (CE)
Nema 5-15
(USA / Canada)
BS 1363 (UKCA)
7
EN
DE
ES
FR
NL