HIKOKI UU 240F Instrucciones De Manejo página 15

11. Tighten all bolts (7) using 5 mm hex wrench.
12. After securely mounting the miter saw, unlock the
hold-down latch of the miter saw and carefully move
the cutting head up and down. If the stand tends to
fall down, reposition the miter saw.
13. Unlock the slide carriage lock knob of the miter saw
and carefully slide the cutting head forward. If the
stand tends to fall down, reposition the miter saw for
more stable position on the brackets.
14. Carefully perform sliding movement test at the
maximum miter and bevel angles to ensure the
stability of the stand and the miter saw.
WARNING
•
Do not mount the miter saw front side back to the
stand. The miter saw should be mounted as the
wheel side of the stand comes to right side of the
miter saw.
•
When you dismount the miter saw, remove the miter
saw together with the mounting brackets assembly,
so that you can put the miter saw and the mounting
brackets assembly all together for use next time. Be
sure to have assistance of two or more people when
you mount or dismount the miter saw.
Fig. K
7
8
2
1
– 15 – – 15 –
en
de
fr
it
nl
es
pt
sv
da
no
fi