User manual: Perfect Waves PressoMassage
2. In the configuration with three applicators there are 2 splitters. They allow to use three
applicators at the same time, such as 2 legs and the abdominal/glutes band.
In case 1. the male connection of the splitter must be connected to the machine and the
twin female one to the two single connectors of the two applicators.
In case 2. the two splitters must be connected to each other. More specifically, the 1
splitter must be connected to the machine as in case 1 while the male connection of the 2
splitter must be inserted into one of the two seats of the female connection of the 1
A single connector must be inserted into the second free seat of the female connection of
the 1
splitter.
st
The two remaining single connectors must be connected into both seats of the female
connection of the 2
nd
CASE 1.
Connectors
couplings
Single
connector
CASE 2.
2
splitter
nd
Connectors
couplings
Single
connector
splitter.
Male connection
of the splitter
Splitter
Female connection
of the splitter
Male connection
of the 1
splitter
st
1
splitter
st
Female connection
of the 1
of the 2
Female conncetion
"Guide pin" on
male connection
Male
conncetion
The male connection ha pins and one
Single
guide pin. They both correspond to
connector
their specific seats on the related fe-
male connection. Therefore, pay much
attention to the direction in which
the male and female connection are
connected to each other as the pins and
the guide pin must be inserted into the
corresponding seats.
splitter
st
Single
connector
Single
connector
coupling
Male connection
splitter
nd
of the 2
splitter
nd
Single
connector
75
English
splitter.
st
Seat of the
"Guide pin"
Female
Pins on male
conncetion
connection
IMPORTANT:
st
nd