English
2. Plug the power cord.
4. Wear the applicators you wish to
use.
Legs
• Wear the legs and secure them with the
zipper, position the legs with the couplings
facing inwards.
• The inflation must start from the foot up
to the groin.
Abdominal/glutes band
• Wear
the
abdominal
tes-hips-abdomen and secure it with the
Velcro.
5. Switch on the device.
7. Adjust the time.
Make sure the inflation is made according to the direction indicated at the paragraph
"Direction of inflation" of chapter "Technical characteristics".
3. Connect the coupling of the single
In Perfect Waves PressoMassage, the
„machine-connector or splitter" coupling is
located on the side of the machine.
• The inflation must start from the upper
Armband
• Wear the armband.
• Fasten the "braces" with the Velcro on the
• The inflation must start from the side of
band
on
glu-
6. Adjust the intensity of the pressure.
8. Select the chamber or
chambers.
Note: all chambers by default
are active.
IMPORTANT:
78
User manual: Perfect Waves PressoMassage
connector or the splitter to the ma-
chine.
Female connection
on the machine
Male connection of
the connector or
splitter
part of the abdomen and move downwards
(groin).
shoulder opposite to that on which the
armband is positioned.
the hand and move in sequence towards
the shoulder.
9. Start the inflation.