KETRON SD1000 Manual De Instrucciones página 63

SYSEX F0H 41H 00H 42H
12H 40H 2pH 56H
vv xx F7H
Notes :
1. NRPN sending method : CTRL#99=high byte, CTRL#98=low byte, CTRL#6=vv. Example : NRPN
0108h = 40h -> CTRL#99=1, CTRL#98=8, CTRL#6=64.
2. x or xx means « don't care »
3. Cross system exclusive :
Address can be 040h xxh xxh or 050h xxh xxh
If addresse=040h xxh xxh : system exclusive applies to midi port 1 (midi channels 0-Fh) if
received on midi port1 , applies to midi port 2 (midi channels 10-1Fh) if received on midi port 2.
If addresse=050h xxh xxh, cross system exclusive : applies to port 2 if received on port1, applies
to port 1 if received on port2
4. Non cross system exclusive applying only on receiving port :
System exclusive applies to midi port 1 (midi channels 0-Fh) if received on midi port1.
System exclusive applied to midi port 2 (midi channels 10-1Fh) if received on midi port2.
5. Non cross system exclusive applying on both ports :
System exclusive will be applied to all midi channels (0-1Fh). Can be received on port 1 or port 2
indifferently.
This is the case for all system exclusive concerning reverb and chorus because reverb and chorus
are the same for both ports 1 and 2.
CC2 lfo1 tva depth (0-100%) (default = 0H) (note 3)