Hama 00054182 Instrucciones De Uso página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• USB Charging Station
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits given
in the specifications.
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not modify the device in any way. Doing so voids the
warranty.
• Only connect the product to a socket that has been
approved for the device.
The socket must be installed close to the product and easily
accessible.
• Do not continue to operate the device if it becomes visibly
damaged.
(This is mandatory for all products with 220 V mains
connections.)
2
4. Features
This charger was specially designed to charge four different
devices at the same time, e.g. smartphones, tablet PCs or
MP3 players. This charger can be used to charge or operate
the devices without a PC or laptop.
5. Operation
Note
• The charger is suitable for a mains voltage of 100-
240 V and can be used around the world. Please note
that a country-specific adapter may be necessary.
Warning
• Before connecting a terminal device, check whether
the power output of the charger can supply sufficient
power for the device.
• Ensure that the total power consumption of all
connected terminal devices does not exceed 5100 mA.
• Please refer to the instructions in the operating manual
of your terminal device.
Unless the operating instructions for the devices you want to
charge explicitly inform you otherwise, proceed as follows:
• With the device switched off, connect it to the charger.
• Plug the charger into an easily accessible and properly
installed power outlet.
• Do not switch on the device for further use until you have
done this.
When charging batteries built into a device, pay attention to
the maximum charging time for the batteries.

Publicidad

Tabla de contenido
loading

Tabla de contenido