SEVERIN MW-7892 Instrucciones De Uso página 22

Setting the clock
The clock uses a 12-hour display format. Once the unit has been connected to the power
supply, the display shows 1:01.
While a programme sequence is running, the present time can be called up by pressing
The clock must be set when the appliance is connected for the first time, and also if a power
failure has reset the clock.
Example: the time to be set is 15:25.
1. Press . The hour digits are displayed. (1: ).
2. Turn , until the present hour is displayed. (3: )
3. Press . The minute digits are displayed. (3:01)
4. Turn , until the present minutes are displayed. (3:25)
5. Press to confirm.
The time is now set and the display shows 3:25 and the symbol
The microwave function
To programme the unit for cooking, the correct mode (microwave), the required power
setting and the cooking time must be selected, before the programme sequence can be
started. The power setting is selected by repeatedly pressing
pre-set to a maximum of 60 minutes. The power setting is shown in %.
Power
(P)
1 x 800W
2 x 640W
3 x 480W
4 x 320W
5 x 160W
6 x 0W
Example: to programme the microwave function for a cooking time of 5 minutes at 60%
power.
1. Press
symbol
2. Turn clockwise, until the display shows 5:00. The symbol
symbols
3. Press . The symbols
Note: With the power set at 0%, the appliance can be used as an egg timer. (See "Egg
timer" section for details).
Power settings
Display Symbol (in
Display)
100 %
80 %
60 %
40 %
20 %
00 %
3 times. The display shows 60 % and the symbol
starts blinking.
and start blinking.
and
starts blinking on the display.
Type
High Heating up liquids, cooking
Medium Defrosting and heating up deep-frozen
high dishes
Medium Cooking delicate food
Defrosting Defrosting
Low Defrosting delicate food
Egg timer function
appear on the display.
22
.
. The cooking time can be
. In addition, the
lights up and the
.