Connecting A Guitar - Vox MSB50ABK Manual Del Usuario

Connecting a Bluetooth Audio Device
If a computer, tablet, smartphone, audio player, etc., compatible with Bluetooth
audio is connected via Bluetooth, this amp can be used as wireless speakers.
Tip Multiple devices cannot be connected at the same time.
Connecting a new device (pairing)
When a new device is connected, "pairing" (mutually registering connection
information) must be performed.
Tip The information for up to eight paired devices can be stored. When a
ninth device is paired, the information for an existing device is deleted
so that the new information can be stored.
Even if pairing failed, the information for that device may be
stored on the amp. If the information for eight devices has already
been stored, the information for an existing device is deleted.
In order to reconnect to the device whose information was deleted, delete
the amp's information from that device, and then perform pairing again.
1. Press the BLUETOOTH button on this amp. The amp enters a waiting
for pairing mode, and the BLUETOOTH LED blinks.
2. Turn on the Bluetooth function for the device to be connected to, and
then select "MSB50-AUDIO" from the list of options on your device.
When a message appears, requesting permission for pairing, allow
pairing. When a passkey is requested, enter "0000".
Tip The passkey may also be called a PIN code, password, etc.
3. If pairing is successful, the amp enters a connection ready mode, and
the BLUETOOTH LED changes to lit.
Tip If no connection is established within 1 minute, the waiting for
pairing mode is canceled (LED turns off).
Reconnecting to a paired device
1. While the amp is in the waiting for pairing mode (Bluetooth LED is
blinking), press the BLUETOOTH button to try to reconnect with a
previously connected device (LED blinks quickly).
2. If the connection is established, the BLUETOOTH LED changes to lit.
Tip If no connection is established within 10 seconds, the reconnection is
stopped (LED turns off).
Tip A reconnection can also be made by selecting "MSB50-AUDIO" in the
Bluetooth settings screen on the device to be connected to.
Tip If the reconnection is performed using operations on this amp, a
connection will be re-established automatically in the future
simply by turning on the amp. To set the amp so that it does not
automatically reconnect, press the BLUETOOTH button while the
LED is blinking quickly in step 1 to cancel automatic reconnection.
Cutting the connection
To cut a Bluetooth audio connection, press the BLUETOOTH button while
the BLUETOOTH LED is lit. The connection is cut, and the LED turns off.
Troubleshooting a Bluetooth connection
Depending on the settings for the other device and timing of the
operations, a connection may fail to be established several times, or the
Bluetooth function on this amp may become unstable. If either of these
occur, check the settings for the other device, and follow the procedure
described below to reset the Bluetooth function on this amp.
Tip When this procedure is performed, the Bluetooth connection will be
cut.
Tip Even after this procedure is performed, information for other devices,
which is stored on this amp, will not be deleted.
1. Hold down the BLUETOOTH button for at least 3 seconds.
2. After the BLUETOOTH LED begins to blink very quickly, release the
BLUETOOTH button.
3. When resetting is completed, the LEDs turn off.
Tip If the problem is not resolved, even after resetting, delete the connection
information for this amp from the other device, and then perform pairing again.

Connecting a Guitar

Connect a guitar to use the VOX MINI SUPERBEETLE AUDIO as a guitar amp.
Connect an amPlug (sold separately) to enjoy a variety of amp sounds and
playing styles. For details on making connections, refer to "Connections".
4 5 6
3 1 2
Guitar amp section
1. GUITAR IN jack: Plug in your guitar here.
2. amPlug IN jack: Insert the input plug of the amPlug (sold separately).
Increasing the GAIN or VOLUME control too much on the amPlug
may result in unexpected distortion or feedback. If this occurs, lower
the GAIN or VOLUME control.
When an amPlug is connected, the GUITAR GAIN knob, GUITAR
TONE knob and GUITAR VOLUME of the VOX MINI SUPERBEETLE
AUDIO cannot be used.
3. amPlug RETURN jack: Use the included stereo mini phone cable to
connect to the PHONES jack of the amPlug.
Before making connections, turn off the amPlug, and set the
VOLUME knob on this amp to the minimum position. After making
all connections, turn on the amPlug.
Tip If no sound is produced, check the battery in the amPlug.
4. GUITAR GAIN knob: Adjusts the gain of the guitar amp.
5. GUITAR TONE knob: Adjusts the tone of the guitar amp.
6. GUITAR VOLUME knob: Adjusts the amp output level of the guitar
connected to the GUITAR IN jack.
Specifications
Amp Head Section
Controller:
VOLUME Knob, SUB-BASS Knob, BASS Knob, MIDDLE
Knob, TREBLE Knob, GUITAR VOLUME Knob, GUITAR
TONE Knob, GUITAR GAIN Knob, BLUETOOTH Button
Input/Output Jacks: AUX IN Jack × 1 (3.5 mm stereo mini phone jack),
PHONES Jack × 1 (3.5 mm stereo mini phone jack)
amPlug IN Jack (6.3 mm monaural phone jack,
unbalanced), amPlug RETURN Jack × 1 (3.5 mm stereo
mini phone jack)
GUITAR IN Jack (6.3 mm monaural phone jack,
unbalanced), SPEAKER OUTPUT Jack × 1 (6.3 mm
monaural phone jack, TS balanced)
Output Power:
Maximum approx 50 W RMS@4 ohms,
25 W RMS@8 ohms, 12.5 W RMS@16 ohms
Wireless Method:
KBM-A1: Bluetooth (A2DP Sink)
Signal processing
Sample Rate:
44.1 kHz
A/D conversion: 24-bit
D/A conversion: 24-bit
Speaker Cabinet Section
Speaker:
1 x 6.5" VOX Original woofer, 1 x 1" VOX Original tweeter
Max Input:
50 W RMS 4 Ohms
Impedance:
4 Ohms
General
Power Supply: AC adapter (DC 19 V
Current Consumption: 3.42 A
Dimensions (W× D×H): 323 × 180 × 596 mm/12.7 × 7.09 × 23.5 inches
Weight: 9.1 kg/20.06 lbs.
Included items: AC adapter, Power cord, Speaker cable, stereo mini
phone cable, Four cushions, Owner's Manual
* Appearance and specifications of this product are subject to change
without notice.
8
)