Changing The Playback Speed; A-B Repeat Play - Panasonic RR-XS450 Instrucciones De Funcionamiento

Changing the playback speed

The playback speed can be adjusted in 21 steps
from the slow speed of 0.5 times normal speed
(50%) to the fast speed of 2 times normal speed
(200%).
1
Press [F1 (SPEED)]
during playback.
2
Press [F1 (SLOW)] or [F2 (FAST)] to select
the speed and press [q OK] to enter.
Status indication
Playback speed:
The playback speed can be adjusted in 10% steps for
speeds faster than normal speed (100%), and 5% steps
for speeds slower than normal speed.
Status indication during playback:
Normal speed playback, playback faster and playback
slower are displayed as " ", " " and " " respectively.
* The speed cannot be adjusted for playback using
folder cue (➜ page 49) or timer playback (➜ page 55).
* When the playback speed is other than 100%, voice
emphasis (➜ page 44) does not work.

A-B Repeat play

Playback repeats between the start point (A) and
finish point (B) if those points are set.
1
Press [ERASE/A-B&]
while playing.
The start point (A) is set and
"
(blinking) are displayed.
2
Press [ERASE/A-B&] at
the fi nish point (B).
The display changes to "
During playback,
(lighting) and repeat play starts.
the playback speed
is displayed.
Cancelling A-B Repeat:
The display will stop
blinking when the
Press [ERASE/A-B&], u , i or [STOP g/RETURN].
speed is fixed.
* You cannot set A-B Repeat when the time between
the start point (A) and finish point (B) is approx. 2
seconds or less.
* When only the start point (A) is set and playback
continues until the end of the file, the end becomes the
finish point (B) and A-B Repeat begins.
* A-B Repeat by setting the range using 2 files is not
possible.
" (lighting) and " "
"
39
39