Charging The Battery - Hama POCKET Instrucciones De Uso

G Operating instruction
Controls and Displays
1. On/off switch
2. 3.5 mm jack
3. DC socket
4. LED indicator
5. Volume control
6. Hand strap
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• 1 Pocket smartphone speaker
• 1 USB/DC cable
• 1 hand strap
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Since the battery is integrated and cannot be removed, you
will need to dispose of the product as a whole. Do this in
compliance with the legal requirements.
2
• Do not drop the product and do not expose it to any
major shocks.
• Do not open the device or continue to operate it if it
becomes damaged.
• Be considerate. Loud volumes can have a detrimental effect
on your surroundings.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids the
warranty.
• Keep this product, as all electrical products, out of the
reach of children!
4. Operation

4.1. Charging the battery

Warning – Battery
• Only use suitable charging devices or USB connections
to charge the product.
• As a rule, do not use charging devices or USB
connections that are defective and do not try to repair
them yourself.
• Do not overcharge the product or allow the battery to
completely discharge.
• Avoid storing, charging or using batteries in extreme
temperatures.
• When stored for a long period of time, batteries should
be charged regularly (at least every three months).
• Charge the speaker fully before using it for the first time.
• Connect the included USB cable to the speaker's DC
socket (3).
• Connect the USB plug on the USB/DC cable to an available
USB port on your computer or another suitable USB
terminal device. Please refer to the operating instructions
for the USB terminal device used.
• The LED indicator (4) will illuminate in red during active
charging. If the battery is fully charged, the red LED
indicator (4) will switch off.